IG42-SB2 Tube Mount Robot Platform

Description

• This IG42-SB2 Tube Mount Robot Platform  is designed and fabricated in North Carolina USA and fully supported by SuperDroid Robots.
• Basically This is a 2WD robot that uses our IG42 motors and can use 6 inch tires, 10 inch standard tires, or 10 inch tiller tires.
• It uses our motor mount tubes to mount two IG42 motors and a single ball bearing to take most of the load off of the motor shaft.
• IG42-SB2 Tube Mount Robot Platform is a single caster is mounted in the rear of the robot.
• The robot uses differential steering (movement is based on two separately driven wheels placed on either side of the robot body.
• Initially It can thus change its direction by varying the relative rate of rotation of its wheels).
• The 2WD robot is excels at turning with heavy loads and on high friction surfaces where a 4WD robot might have trouble.
• See our ATR page for more details about our All Terrain Robots.
• Certainly If you need this IG42-SB2 Tube Mount Robot Platform customized beyond the provided options below.
• The TP-111-042 kit allows for a wide range of customizations based on your needs.
• We offer a variety of motor controllers, batteries, RC controllers, and encoders so you can configure the robot.
• The weight of the robot will vary depending on how the robot is configured (batteries are the main cause of this).
• IG42-SB2 Tube Mount Robot Platform This is a configurable robot kit with selectable options at the bottom of the page.
• The options are pre-selected to reflect our recommended configuration but can be changed to suit your needs.

Standard Configutration:

• Accordingly The standard configuration comes unassembled.
• Initially Includes the chassis, hardware, and wiring kits.
• Gear Motors: Two (2) 122 RPM gear motors (one per axle/wheel).
• Certainly Wheels: One (1) Pair of 6 inch pneumatic wheels.
• Basically Battery System: Two (2) Interstate 12V 8 Ah Lead Acid Battery providing 1-3 hours of operation depending on use.
• IG42-SB2 Tube Mount Robot Platform Motor Controller(s): One (1) Sabertooth Dual 12A RC Motor Controller.
• Initially Control System: One (1) FLYSKY FS-i6 2.4Ghz 6Ch transmitter and receiver.